USER MANUAL
19
z
Press FUNC to enter MODE OPTION
z
Till to MUSIC SHOW 2 shown on LCD monitor.
The laser is set at MUSIC SHOW 2 standalone mode and it will play the
preprogrammed show until next setting is changed. MUSIC SHOW 2 is slow
and soft show which is better for MUSIC BAR.
z
Press ENTER to confirm the laser to show the present mode at the ne xt
operation.
Attention In preprogrammed standalone MUSIC SHOW mode, the
laser beam will be blank-out in 3 seconds without
AUDIO/MIC activated signal.
SD SHOW
z
Press FUNC to enter MODE OPTION
z
Press UP/DOWN to choose folder , the folder name h ave to be 8 characters
including letter or numbers. Any folder name with more than 8 characters can
not be displaced on LED monitor. Press ENTER to choose the folder.
z
Press UP/DOWN to choos e show mode: ILDA single show or PRG
preprogrammed show.
z
Press ENTER to confirm the laser to show the present mode at the ne xt
peration.
Attention: Please put ‘ild’ format laser show in SD card only. DO NOT
Save any other files in it. SD maximum support 100 folders with less
than 255 files in each folder. The SD has to be FAT32 format system.
Attention: PRG preprogram show
In SD card in folder ANIMATION, for example, to do the PRG
preprogrammed show, a TXT file (with WINDOW SYSTEM) has to be
done in the same folder. The TXT file has to be renamed to *.PRG
For example:
In folder ANIMA folder, there are 3 ild file show. They are ANIMA1.ild,
ANIMA2.ild, ANIMA3.ild. If you want to do a preprogram show with
them, you should do the TXT files as:
