EuroLite LED STP-14, Руководство пользователя

Страница: 26 / 32

00121304, Version 1.1 26/32
DMX operation
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 37 control channels.
However, it can also be switched to a mode with 2, 6 or 34 channels if different functions are required. To be
able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller’s documentation.
1 Press the MENU button so many times until Addr is indicated in the display. Confirm with the ENTER
button.
2 The display indicates 2 CH (2 DMX channels), 6 CH (6 DMX channels), 34 CH (34 DMX channels) or 37
CH (37 DMX channels). Use the buttons UP and DOWN to select the desired number of DMX channels.
Confirm with the
ENTER
button.
3 Now the display indicates the menu item for the DMX start address A*** . Use the buttons UP and DOWN
to set the address. Confirm with the ENTER button.
4 DMX is indicated when the last segment flash. If the control signals are missing, no segment flashes on
the display.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
The LEDs of the device are divided into different segment groups with 5 segments each, which can be
individually controlled with the following DMX protocol.
Functions in DMX mode
2-channel mode
Channel Value Function
1
000 – 009 No function
010 – 044 Auto program 1: random strobe effect
045 – 079 Auto program 2: (WW LED + RGB LED)
080 – 114 Auto program 3: (WW LED + CW LED)
115 – 149 Auto program 4: (RGB LED + CW LED)
150 – 184 Auto program 5: (CREE WW LED)
185 – 219 Auto program 6 (RGB LED)
220 – 254 Auto program 7: (CW LED)
255
Sound control mode
2 000 - 255 Auto mode with increasing speed