00095610.DOC, Version 1.0
21/24
Fading colors
Press the MODE button until the display shows
A3.01
. You can now select the desired fading color program
via the UP or DOWN buttons, and press the ENTER button to confirm. Please press the ENTER button
again and then you can the select the desired speed (
A3.01 – A3.32
, increasing) via the UP or DOWN
buttons. Please press the ENTER button to confirm and then the MODE button to return to the main menu.
Sound control
Press the MODE button until the display shows
A4.01
.
You can now select the desired sound control
progarm via the UP or DOWN buttons, and press the ENTER button to confirm. Please press the ENTER
button again and then you can select the desired microphone sensivity (
A3.01 – A3.04
) via the UP or DOWN
buttons. Please press the ENTER button to confirm and then the MODE button to return to the main menu.
Strobe effect
Press the MODE button until the display shows
A5.01
.
You can now select the desired strobe effect via the
UP or DOWN buttons, and press the ENTER button to confirm. Please press the ENTER button again and
then you can set the desired speed (
A5.01 – A5.32
, increasing) via the UP or DOWN buttons. Please press
the ENTER button to confirm and then the MODE button to return to the main menu.
Auto run (all programs in a loop)
Press the MODE button until the display shows
A6.01
.
You can now select the desired auto program via the
UP or DOWN buttons, and press the ENTER button to confirm. Please press the ENTER button again and
then you can set the desired speed (
A5.01 – A5.32
, increasing) via the UP or DOWN buttons. Please press
the ENTER button to confirm and then the MODE button to return to the main menu.
Blinking
Press the MODE button until the display shows
A7.01
.
You can now select the desired static color (A7.02 –
A7.19). Please press the ENTER button zu confirm. Press the ENTER button again and now you can select
the desired blinkING speed (
A5.01 – A5.32
, increasing) via the UP or DOWN buttons. Please press the
ENTER button to confirm and then the MODE button to return to the main menu.
Dimmer Mode
Press the MODE button until the display shows
r000
and press the ENTER button to confirm. You can now
select the desired brightness values for the red color via the UP or DOWN buttons. Press the ENTER button
to confirm. You can now set the other colors accordingly. Please press the MODE button to return to the
main menu.
DMX-Mode
The Control Board allows you to assign the DMX channel mode and the DMX fixture address, which is
defined as the first channel from which the device will respond to the controller.
Addressing
Press the MODE button until the display shows
d001
. Press the ENTER button. You can now set the desired
address via the UP or DOWN buttons. Press ENTER to confirm.
Please, be sure that you don’t have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX-chain. If several devices are addressed similarly, they will
work synchronically.
Controlling:
After having addressed the device, you may now start operating it via your lighting controller. Please see the
following DMX protocol graphics for the respective channel values.
Содержание LED SLS-9 QCL 9x10W RGBW Floor Spot
Страница 24: ... EUROLITE 2015 00095610 DOC Version 1 0 ...
