00055890.DOC Version 1.4
9/10
The symbol
- - -m
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 0.1 meters.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
INSTALLATION
Unpack the LED Ribbon segements and connect them to the desired length.
LED Ribbons can be soldered together via the attached red/white connection cables.
In order to design the desired patterns, draw the form onto the surface or wrap the LED Ribbon around the
desired form and attach the LED Ribbon with adhesive tape or a few drops of glue.
For free forms, you can use a stable wire in order to bring the LED Ribbon into the desired form.
Only cut the LED Ribbon where marked. The ribbon can be cut after every 5 cm.
You can connect as many LED Ribbons as the transformer can carry from the total power output.
The total power output can vary from transformer to transformer.
Install the lighting chain at the desired installation-spot.
You can seal the last LED Ribbon segment with some silicone.
Connect the 2 power cables of the LED Ribbon to the 12V transformer via standard connection terminals.
Connect the transformer to the mains. Make sure that the outlet is in a dry area.
OPERATION
After you connected the ribbon chain to the mains, the LEDs start burning.
Please note:
Never run the LED Ribbons in the packaging or rolled up!
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device. If defective, please dispose of the unusable lighting chain
in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
