00056819.DOC, Version 1.0
19/20
DMX MODE
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the EUROLITE LED PS-4 will respond to the controller.
Addressing
Press the MODE button until the display shows
Add
. You can now set the desired address via the UP or
DOWN buttons.
Setting the DMX Start Address:
Mode:
Value:
Add
001 - 512
Controlling:
After having addressed the EUROLITE LED PS-4, you may now start operating it via your lighting controller.
Note:
It’s necessary to insert the XLR termination plug with 120
in the last lighting in the link in order to ensure
proper transmission on the DMX data link.
Choosing a DMX channel mode with 3 or 5 channel occupation
The device has 2 DMX-modes. The Control Board allows you to assign the DMX-Mode.
Setting DMX Mode
After setting the desired address via the UP or DOWN buttons, press the MODE button again and the
display shows 5ch.
In case you would rather select the 3-channel mode, press the DOWN button in order to choose the 3ch
setting.
Mode:
Value:
5ch (default setting)
3ch
DMX-protocol
5-channel mode
Channel:
Value:
Function:
1
000 – 255
Red (0 – 100%)
Channel:
Value:
Function:
2
000 – 255
Green (0 – 100%)
Channel:
Value:
Function:
3
000 – 255
Blue (0 – 100%)
Channel:
Value:
Function:
4
000 – 255
Dimmer (0 – 100%)
Channel:
Value:
Function:
000 – 000
ON
001 – 005
Sound Control (7 colors)
006 – 010
ON
5
011 – 255
Strobe (increasing)
