51931000_V_1_0.DOC
15/30
Connection with the mains
DANGER TO LIFE!
The electric connection must only be carried out by a qualified electrician!
The occupation of the connection-cables is as follows:
Cable
Pin
International
Brown
Live
L
Blue
Neutral
N
Yellow/Green
Earth
The earth has to be connected!
Connect the device to the mains with the power-plug.
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
OPERATION
Connect the connection cable-end with phone jack RJ11 with the corresponding socket of the LED MCL
420/600 Slave devices.
Attention:
This device can be used with up to 8 LED MCL 420/600 Slave devices. Max. distance between
the LED disks is 2.5 m.
Infrared (IR) Remote Control
With the Remote Control POWER-switch, you can switch the device on and
off. A short white flash signalizes that the LED disk is on.
You may choose from 4 functions:
MODE
,
WHITE
,
SPEED+/-
, and
FIX
with
the IR Remote Control
Select the desired mode with the
MODE
-button.
Mode:
Feature:
Color Wash
9 colors
Color Jump
9 colors
Switch-on/Fade-out
9 colors
Rainbow Color Chasing
12 colors
