00129165, Version 1.0
24/32
Stand-alone mode
Preset colors
In the
Stat
mode the device will constantly emit one of 19 preset colors.
1
Press the
MENU
button so many times until
Stat
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to adjust the desired color. Confirm with the
ENTER
button.
Automatic mode
In automatic mode, 9 show programs are available that run at an adjustable speed.
1
Press the
MENU
button so many times until
Auto
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program (01 – 09). Confirm with the
ENTER
button.
2
Press the
MENU
button so many times until
SPEE
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
01
(slow) to
09
(fast). Confirm with the
ENTER
button.
Color mix
In
Colo
mode each of the 4 colors can be individually adjusted in intensity. The device will then constantly
emit the chosen color setting.
1
Press the
MENU
so many times until
Colo
is indicated in the display. Confirm with the
ENTER
button.
2
Now the display indicates the letter
R
for the color red and the corresponding intensity value. Use the
buttons
UP
and
DOWN
to adjust the desired intensity.
3
Confirm with the
ENTER
button. Now the color green can be set; then blue and then white until the
desired color intensity is achieved.
Total brightness
The menu point
dIMM
allows adjusting the total brightness for all stand-alone operating modes: Stat, Auto
and Colo
.
1
Press the
MENU
button so many times until
dIMM
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to adjust the desired brightness (dl
1
= dark, dl
9
= bright). Confirm with
the
ENTER
button.
Fading program
In
FADING mode
the speed for fading can be set.
1
Press the
MENU
button so many times until
FAdE
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to adjust the desired speed (FA 0-9). Confirm with the
ENTER
button.
Strobe effect
In
FLAS mode
the speed for strobe effect can be set.
1
Press the
MENU
button so many times until
FLAS
is indicated in the display Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to adjust the desired speed (FL 0-9). Confirm with the
ENTER
button.
