00108624.DOC, Version 1.2
13/16
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
When using smoke machines, make sure that the device is never exposed to the direct smoke jet and is
installed in a distance of 0.5 meters between smoke machine and device. The room must only be saturated
with an amount of smoke that the visibility will always be more than 10 meters.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
The symbol
- - -m
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than the given value.
The maximum ambient temperature
T
a
= 45° C must never be exceeded.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock etc.
WEEE Directive
When to be definitively put out of operation, take the unit(s) to a local recycling plant for a disposal
which is not harmful to the environment. Do not dispose of as municipal waste. Contact your retailer or
local authorities for more information.
INSTALLATION
Attachment
The device must only be installed absolutely planar at a vibration-free, oscillation-free and fire-resistant
location.
Procedure:
Step 1:
Place the bracket onto the stake/stand and tighten the fixations screw from the other side.
Step 2:
Adjust the desired inclination-angle via the bracket and tighten the fixation screws.
Step 3:
Install the device at the desired installation-spot.
Connection with the mains
Connect the device to the mains with the power-plug.
Make sure that the outlet is in a dry area.
