00071399.DOC, Version 1.1
21/24
STAND ALONE-MODE
Automatic
In Auto Mode the internal program is called up automatically in a continuous loop.
Press the MODE button until the LED display shows "
AUTO
".
Please press the ENTER button to confirm.
To set the desired program speed, press the MODE button until the LED display shows "
s---
". The desired
speed (
s001 - s100
, increasing) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm.
Sound Control
Press the MODE button until the LED display shows "
SNd 1
" or "
SNd 2
".
Please press the ENTER button to confirm.
SNd 1
offers sound control without SMD strobe;
SNd 2
offers sound control with SMD strobe.
You can do without a controller as the device features a built-in microphone, which provides automatic sound
control. You can adjust the sensitivity with the rotary-control on the rearpanel.
Master/Slave
Set the Master device to
Automatic
or
Sound
Control
Mode and set each Slave device to the same DMX
mode
CH2
or
CH5
.
DMX MODE
The LED display allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED FE-900 Hybrid will respond to the controller.
Addressing
Press the MODE button until the display shows one of the DMX modes
CH2
or
CH5,
then press the ENTER
button to confirm.
Set the desired address via the UP or DOWN buttons (d001 - d512).
Please press the ENTER button again to confirm.
Controlling:
After having addressed the LED FE-900 Hybrid, you may now start operating it via your lighting controller.
Please see the following DMX protocol graphics for the respective channel values.
DMX-protocol
2-Channel Mode:
Channel 1 - Auto Programs
Value:
Function:
000 – 015
Blackout
016 – 089
Auto program slow
090 – 164
Auto program middle
165 – 240
Auto program fast
241 – 255
Sound control
