00128029, Version 1.0
28/36
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the
MENU
button so many times until
Soun
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program (So01~So04). Confirm with
the
ENTER
button.
2 Press the
MENU
button so many times until
SPEd
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
SP 01
(slow) to
SP 09
(fast). Confirm with the
ENTER
button.
3 Press the
MENU
button so many times until
SEnS
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to Adjust the microphone sensitivity to the volume of the music
(
SE 01
= low,
SE 09
= high).
4 If you enable the silent scene mode (
on
setting) in menu item
SILE
,
the LEDs will switch off if the volume
is too low or if there is no sufficient bass beat. If you disable this mode (
off
setting) the LEDs remain on
during periods without music.
Individual color mix
In the color mode
Colo
each of the 4in1 LEDs can be individually adjusted for intensity. The device will
constantly emit the set color.
1
Press the
MENU
so many times until
Colo
is indicated in the display. Confirm with the
ENTER
button.
2
Now the display indicates the letter
r
for the color red and the corresponding intensity value. Use the
buttons
UP
and
DOWN
to adjust the desired value.
3
Confirm with the
ENTER
button. Now the color green can be adjusted, then blue and white.
Total brightness
Menu point
diMM
allows the adjustment of the total brightness for all stand-alone operating modes:
Stat
,
Auto
,
Soun
,
Colo
.
1 Press the
MENU
button so many times until
diMM
is indicated in the display. Confirm with the
ENTER
button.
2 Use the buttons
UP
and
DOWN
to adjust the desired brightness (
dI 01
= dark,
dI 09
= bright). Confirm
with the
ENTER
button.
Interconnecting several devices (master/slave operation)
Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller. The devices must be set to the corresponding
operating modes.
1 Configure all slave units before connecting the master unit: Press the
MENU
button so many times until
SLAU
is indicated on the display. Confirm with the
ENTER
button.
2 Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
3 Set the master unit to the desired operating mode. The interconnected devices will now operate
synchronously.
Содержание KLS-120
Страница 2: ......
