background image

 

 

Safety Information 

WARNING! 

Read the safety precautions in this section before 

installing, powering, operating or servicing this 

product. 

The following symbols are used to identify important safety information on the product and in this manual: 

 

DANGER! 

DANGER! 

Protection 

WARNING! 

WARNING! 

WARNING! 

WARNING! 

Safety hazard. 

Hazardous 

from burn 

High brightness  Burn hazard. 

Wear 

Refer to user 

Risk of severe 

voltage. Risk 

and fire

light source, 

Hot surface. 

protective 

manual. 

injury or death. 

of lethal or 

 

With risk of 

Do not touch

Eye wear. 

 

 

severe electric 

 

burned eyes. 

 

 

 

shock. 

 

Warning!

 

High brightness light source,don't look at the light directly so that keep the risk of burned eyes

 

away.

 

This product is for professional use only. It is not for household use.

 

■ 

This product presents risks of severe injury or death due to fire and burn hazards, electric shock and falls.

 

Read this manual before installing, powering or servicing the fixture, follow the safety precautions listed below and 

observe all warnings in this manual and printed on the fixture.

 

If have any problem,please contact the supplier.

 

 

Содержание HL-BSW380


















Отзывы: