00028935.DOC, Version 2.0
27/29
Value=[Linear]
Curve CH[01]
Value=[Switch]
Switch]. Use the button MENU to navigate from „Curve CH [XX]“ to „Value
= [X]“.
UP/DOWN
MENU
UP/DOWN
ESC
7.2.6 Manual (manual light control)
In manual mode, the Dimmer pack can be used without an external controller and the channels can be
adjusted manually via the buttons below the LCD. Depending on the mode, you can adjust a value for all
channels or for each channel individually. The manual control cannot be used in DMX mode. The values set
in the menu „Manual“ do not affect the built-in programs (DMX Fail function), however, they must be within
the upper limit, set in the menu „Max level“ (channel limitation). Contrary to the DMX mode (DMX Fail
functions), the manual mode has no power failure function.
Display
Function
Button
Manual
All
Manual All
Value = [20%]
ALL | Assign a value to all 12 channels [0-100%].
MENU
UP/DOWN
MENU
UP/DOWN
ESC
Manual CH[01]
Value=[023%]
SINGLE | Assign a value to each of the 12 channels individually [0-100%].
Use the button MENU to navigate from „Manual CH [XX]“ to „Value = [XX]“.
MENU
UP/DOWN
MENU
UP/DOWN
MENU
UP/DOWN
ESC
8. CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
If the fuse interrupts, please reset the breaker.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
