41907045_V_1_1.DOC
18/33
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet. The
cooling-fan should be cleaned monthly.
There are no serviceable parts inside the device except for the lamp and the fuse. Maintenance and service
operations are only to be carried out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamps".
Replacing the fuse
If the ventilation-fan does not work, the fine-wire fuse of the device might be defect. Only replace the fuse by
a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
220-250 V/50 Hz
Power consumption:
2000 W
Connection:
6-pin industrial plug
Dimensions (LxWxH):
410 x 250 x 150 mm
Weight:
6 kg
Fitting lamp:
4 x OMNILUX 230V/500W R7S 117mm linear burner
No. 91100400
Fuse:
F 0.5 A, 250 V
Controllers:
EUROLITE LCD-4 MP/S
No. 70062666
Please note: Every information is subject to change without prior notice. 04.06.2004 ©
