OPERATION
7
•
EN
Single-color LEDs
If the DIP switch has been set to the operating mode DIM, the following functions can be
controlled with the remote control. The remote control switches to stand-by mode after 8
seconds of inactivity and can be reactivated by pressing any button.
Button
Function
No function
Power on
Power off
Dimmer ring
Adjusting brightness clockwise
Mode selection: flashing, fade
Reduce brightness by 10% (Nightlight function)
Reduce brightness in 5
levels
(10 %, 30 %, 50 %, 70 %, 100 %)
Increase brightness in 5
levels
(10 %, 30 %, 50 %, 70 %, 100 %)
Reduce brightness in 1024
levels
(Keep button pressed to proceed quicker)
Increase brightness in 1024
levels
(Keep button pressed to proceed quicker)
Reduce speed for dynamic programs in 100
levels
(Keep button pressed to proceed quicker)
Increase speed for dynamic programs in 100
levels
(Keep button pressed to proceed quicker)
Select zones 1-4 (status indicator lights),
keep pressed for 2 seconds to select all zones (all status indicators light)
RF signal indicator
ON
Mode
Brig (5 levels)
Brig (1024 levels)
Speed +
Zone indicators
SET
OFF
Dimmer ring
Nightlight
Brightness ‒ (5 levels)
Brightness ‒ (1024 levels)
Speed ‒
Zone selection
(keep pressed for 2 seconds
for all zones)
