Euroheat Nestor Martin IT13 Скачать руководство пользователя страница 7

© EUROHEAT DISTRIBUTORS (H.B.S) LTD. June. 2010

    

 Instructions Part Number IN1180 Ed.D1

7

A insert is very much safer than an open fire, but if you have children or infirm people in the house please ensure 
it is suitably guarded, and consideration should also be given to accidental contact with the insert if you are 
entertaining with a busy house full of guests.  If you have a remotely operated insert please ensure you keep the 
remote operating handset well away from the insert, children and dogs.

Choice of Fuels

Use of fuels in smoke exempt areas.

If you are operating this stove within a smoke exempt area it is approved for use for the following fuels only:
Seasoned dry wood. With a moisture content of 20% or less
Smokeless coal approved for use in smoke exempt areas.
Other fuels such as house coal, briquettes, waste wood, peat, wood over 20% moisture must not be used unless 
approved for use in smoke exempt areas.

Wood

All wood will burn slightly differently, but the most important differences  between woods is their moisture 
content. Until the moisture has been driven off from the wood it will remain below its combustion temperature. 
When the outer skin has dried and beginning to burn, much of this heat energy will be wasted having to boil 
off the water remaining in the core of the wood. Copious amounts of water vapour, in all but the most insulated 
flue, will condense, and mix with the products of combustion to form creosote and other undesirable substances 
which will eat away the fabric of the flue, and eventually build up to  block the flue. At any time this build up of 
tar will be capable of causing a chimney fire.
The advice to burn only "dry" wood is sometimes confusing because the atmospheric moisture will prevent wood 
ever becoming "dry". It is acceptable to burn wood with a moisture content of less than 20%, which can be 
achieved by splitting the wood, stacking it so as to allow air to circulate within the stack and storing it under cover 
for between 18 months and 30 months, depending on prevailing climatic conditions. The use of a wood moisture 
content meter will confirm the amount of water remaining in the wood easily. The practice of drying wood by the 
insert should be discouraged, firstly because it should be unnecessary, and secondly because stored wood will 
invariably become the home to many varieties of insects, many of  whom enjoy eating wood. To introduce them 
into your house and encourage them with heat and time to make new homes in your furniture and structural 
timbers is not recommended.

Smokeless Coal

We recommend burning deep mined anthracite, a natural hard coal which is classified as being a smokeless fuel; 
specifying the size of “large nuts”  will give most visually attractive and efficient burning. Smaller sizes than 
this will tend to choke the air flow too easily making long burning times without attention problematic. Various 
manufactured smokeless coals are available giving differing burning characteristics and the manufacturers or 
your coal merchant will advise you as to their suitability for inserts. The difficulties and dangers associated with 
burning ordinary bituminous coal (house coal) with its relatively high volatile content make it totally unsuitable 
and potentially dangerous for burning in any insert. 

Lignite 

(also known as solid mineral fuel)

Lignite is obtainable in briquette form and is best described as young coal. It behaves very much like coal and 
should be burned as smokeless manufactured coal. However it is not classified as smokeless and should not be 
used in smoke exempt area`s.

Peat

Peat burns very well, but it is bulky and its distinct aroma will pervade your home and everything in it, but 
otherwise peat can be burned as wood. However it is not classified as smokeless and should not be used in 
smoke exempt area`s.

DO NOT BURN petroleum based fuels such as petro-coke, they may seriously damage your insert. The manufacturers 
of  other  blended  coal  products,  containing  a  proportion  of  petro-coke,  should  be  approached  to  confirm  the 
suitability of the product for use within an enclosed appliance that does not have a chrome steel grate.

Содержание Nestor Martin IT13

































Отзывы: