manualshive.com logo in svg

Euroheat Nestor Martin 023, Руководство по эксплуатации

Поделиться
Скачать
Euroheat Nestor Martin 023 Скачать руководство пользователя страница 29

© EUROHEAT DISTRIBUTORS (H.B.S) LTD. Jan 2013

    

 Instructions Part Number IN1213 Ed B1

28

For stoves other than the 43 models the sloping cast back plate is 
removed by lifting upwards and towards the front of the stove.

The cast side internal plates 
are removed by lifting and 
bringing the rear of the 
plates towards the centre 
of the stove. The back cast plate is removed by pulling the top 
towards the front of the stove.

Stoves with a top flue outlet may have an additional stainless steel baffle vane. This can be removed by pulling 
the tab at the front towards the front of the stove to remove the baffle from its locating rails, giving access to 
the flue way. See installation instructions for more detailed information.

Summer Shutdown.

At the end of each heating season the entire installation should be thoroughly cleaned and examined for 
soundness; this should include having the flue examined by a registered sweep. The stove interior should be 
treated with a moisture repellent such as WD40 and all operating mechanisms lubricated with a suitable oil, or 
again with WD40. The door and glass seals should be inspected and replaced if showing signs of damage, as 
uncontrolled air entering the stove could damage the glass and cast iron components within the stove.

ALWAYS CHECK FOR ANY FLUE BLOCKAGE BEFORE LIGHTING

THE STOVE AFTER A PROLONGED SHUTDOWN.

Faulty Operation

Always seek the advice of a qualified engineer if your stove is not operating correctly. Never use the stove with 
any damaged or malfunctioning components.

Removing Other Internal Components

Top Flue Outlet Baffle

Spigot protector

Baffle plate

Baffle plate

Spigot protector

Содержание Nestor Martin 023

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды