13
9
FIRST START-UP
(OPERATOR)
9.1
FIRST CLEANING
Clean the display unit thoroughly before putting it into operation.
The cleaning procedures are specified in the chapter on “CLEANING”.
9.2
FIRST START-UP
9.2.1 COUNTER WITH CONDENSING UNIT
•
Plug in
•
Press
of the controller to put the display unit into operation.
•
Check that:
o
The controller display lights up.
o
The compressor turns on.
o
The interior fans operate (check to see that air circulates).
o
Switch on the lights using
.
Fig. 1: panel with condensing unit
9.2.1 COUNTER WITHOUT CONDENSING UNIT
•
Plug in
•
Press the switch
to put the display unit into operation; check that the controller display lights
up and that the fans turn on (check to see that air circulates)
•
Switch on the lights by pressing
.
Fig.2: panel without condensing unit
To carry out the operations of this chapter wear safety gloves.