EUROCOM Notebook V09.1.00BETA, Руководство пользователя, Страница: 27 / 274

Operating System Setup 1 - 7
Quick Start Guide
1
Operating System Setup
If you are installing new system software, or are re-configuring your computer for a different system, make sure you
configure the appropriate OS setting in the BIOS before installing a new operating system.
1. Start-up the computer and press < F2 > to enter the BIOS .
2. Go to the Advanced menu, select “ Installed O/S ” and make sure the appropriate operating system is selected.
3. Go to the Exit menu and select “ Exit Saving Changes” (or press F10 and select “ Yes ” then press Enter) and
press Enter to exit the BIOS and reboot the computer.
Figure 1 - 2 - BIOS (Operating System Selection)
Main A Advanced Security Boot Exit
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Advanced
Select options for
Advanced Chipset
features.
Phoenix SecureCore(tm) Setup Utility
Advanced Chipset Control
Installed O/S: [Vista]
SATA Mode Selection: [AHCI]
DFOROM(Robson) Support: [Enabled]
Reset Configuration Data: [No]
Boot-time Diagnostic Screen: [Disabled]
Legacy OS Boot: [Enabled]
Power On Boot Beep [Disabled]
Battery Low Alarm Beep: [Disabled]
FAN Control: [Automatic]