For this mode is only one screen.
7. Set Common Parameters menu
After pressing key '4' the following screen appears:
It is possible to change the following parameters:
- wide/narrow bandwidth of PLL's
- transmitters enable mode
Last parameters are important only in certain modes
8. Load configuration from memory menu
This option allows loading the previously saved configuration from the non
volatile memory.
9. Save configuration to memory menu
It is possible to save current configuration in the nonvolatile memory for later
use.
TEL-KA EUROCOM B / E1 Mux converter
www.tel-ka.com.p
l
User Manual v.3.1 4. Apr. 2014
Page 12/13
