EUROCOM 6100t, Руководство пользователя, Страница: 28 / 60

28
Upgrading CPU
The system is capable of hosting a wide range of Intel CPUs’ speed. Upgrading your
CPU will increase your computing speed. Different CPUs may have different power
voltages. The Notebook comes standard with 3.3 volt CPU. If you upgrade CPU at
other power voltage than 3.3V, contact your dealer to obtain the
CPU Power Module
to set the required power voltage. Both CPU frequency and CPU voltage are
configurable by DIP Switches.
Setting CPU Speed
1.
Turn the Notebook over.
2.
Remove the CPU cover.
3.
Remove the two screws that fasten the bracket mounted on the heat sink.
4.
Remove the four screws that fasten the heat sink mounted on the CPU.
5.
Locate the DIP Switch SW2 to set the proper configuration for CPU frequency.
SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 CPU Speed
Off Off Off Off Off 90 MHz
Off On Off Off Off 100 MHz
Off Off Off On Off 120 MHz
Off On Off On Off 133 MHz
Off Off On On Off 150 MHz
Off On On On Off 166 MHz
Off On On Off Off 200 MHz
Off On Off Off Off 233 MHz
Off On Off On On 266MHz
Off On On On On 300MHz
Setting CPU Power
Find the 4-pole DIP Switch on the CPU Power Module to set the power voltage of
the CPU you just installed. Refer to the user guide of the installed CPU to make sure
which power voltage you should set.
Incorrect setting will cause damage to both
the system and the CPU.
SW1 SW2 SW3 SW4 CPU Power
On Off Off Off 2.2V
Off On Off Off 2.45V
Off Off On Off 2.8V