EUROCOM 3400 UltraLite, Руководство пользователя

Страница: 75 / 152

1
2
3
4
5
6
7
8
4 – 9
Firmware: setup – advanced menu
I/O D
EVICE
C
ONFIGURATION
(
ADVANCED
M
ENU
)
S
ERIAL PORT
A
(A
DVANCED
M
ENU
>I/O D
EVICE
C
ONFIGURATION
)
If you don’t plan to use this port,
you can set this line to “Disabled”
to save power. The default setting
is “Enabled”.
” ”
” ” ”
Serial Resources
If you are not planning to use these
serial ports, you can disable them
(by choosing “Disabled”). This way
you can assign resources to an-
other device, e.g. a PC Card de-
vice.
Fax/Modem Note: If you are using a PC
Card fax/modem which is limited to IRQs
3, 4 or 5, you may want to disable Serial
Port B to free up these resources.
S
ERIAL PORT
B
(A
DVANCED
M
ENU
>I/O D
EVICE
C
ONFIGURATION
)
This assigns resources to the built-
in IrDA port. If you don’t plan to
use this port, you can set this line
to “Disabled” to save power. The
default setting is “Enabled”.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
I/O Device Configuration Item Specific Help
F1 Help
×Ø
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
ÕÖ
Select Menu Enter Select X Sub-Menu F1Ø Previous Defaults
Serial port A: [ Enabled ]
Resource: [Com1]
Serial port B: [Enabled]
Mode: [IrDA]
Resource: [Com2]
Parallel port: [Enabled]
Mode: [ECP]
Resource: [Lpt1]
DMA channel: [DMA 3]
Set the base I/O address
and the interrupt for
serial port A.
[Com1] : 3F8, IRQ4
[Com2] : 2F8, IRQ3
[Com3] : 3E8, IRQ4
[Com4] : 2F8, IRQ3
[Com5] : 3F8, IRQ7
[Com6] : 2F8, IRQ5
[Com7] : 3E8, IRQ7
[Com8] : 2F8, IRQ5
Default: [Com1]
A
DVANCED
M
ENU
,
I/O D
EVICE
C
ONFIGURATION
S
UB
-M
ENU
F
IG
. 4 – 4