EUROCOM 1100-P, Руководство пользователя

Страница: 109 / 120

5-8
User’s Manual
delete [PCI Multimedia Audio Device]. Click [O k] and restart the
notebook.
m
Enter into Win98. The program will automatically find out [Add New
Hardware Wizard]; choose [PCI Multimedia Audio Device], [Next]
and click [Browse] to enable the setting of [specify a location]. Open
the path of [D:\audio\WIN95], click [Next] and [Finish] to set up the
first audio driver.
Step III: PCMCIA Driver Installation
m
Go to Win98. Click [Start] [Settings] [Control Panel]
[System]. Remove PCMCIA and also delete two sub-directories
[Generic CardBus Controller].
m
Switch to DOS. Copy the file [PCMCIA.inf] to the directory
[C:\windows\inf].
m
Reboot Win98 system.
Step IV: Video-in Driver Installation
m
Restarting the notebook, before entering windows, press the keys
Ctrl+Alt+S to switch to SCU status. Select [Component] and choose
[Enable] for [Video-In Mode].
m
Under Win98, click [Start] [Run] and open the path [D:\video-
in\setup.exe ] to complete the installation.
Step V: ATI DVD Play Driver Installation (Optional)
m
Note: Firstly make sure that it has already successfully installed the
VGA drivers, Audio Driver and DirectX6.
m
Boot the system, press Ctrl+Alt+S to enter SCU system. Select
[Power]. Enable [Low Power Saving], or Select [Advance CPU
control] to set [Full Speed]. (IF the clock of Intel Pentium II is above
366MHz/400MHz or if your DVD runs smoothly, you can skip the
step.)
m
In the windows system, click [Start]; select[Setting], [Control Panel],
and [System]. Open [Device Manager]; select [CDROM]. Click the
item including the type of [DVD-ROM], and [Setting]; then enable
[DMA] in Options.
m
Insert the CD of Ati-DVD-Play applications and the program will
automatically run the installation until finished. Otherwise, click