Instruction Manual
AirSanitizer
12/28
V12-20.0
Figure 4
: Center of gravity centrally between the forks
3.3 Storage
The AHU is generally packed in nylon. This package is suitable to protect the AHU during loading
and unloading from bad weather, but not for outdoor storage. The insertion into a dry area after un-
loading is therefore essential for the preservation of the AHU.
NOTICE!
Removal of nylon packaging
Remove the nylon packaging after delivery and place the AHU in a dry, weather
protected area: the risk of corrosion due to the lack of ventilation in combination
with a higher humidity under the nylon packaging is possible. For example, white
rust may be formed within a short time on galvanized surfaces. It can further arise
that an excessively high temperature is created under the packaging, which can
also cause damages to the components.
4
Assembly / Erection
4.1 Space requirements
The AHU must be positioned in the room so that it has good access to the room air. Therefore, the
AHU must not be covered or placed behind or in a cupboard, e.g.
At the location of installation, it should be spatially possible to carry out proper maintenance and, if
necessary, to remove components. For this purpose, a free working space from the AHU width +
300 mm must be available on each side. For the space requirement, it must also be considered
that the ON / OFF switch (operating lamp) on the rear of the AHU remains accessible and that the
door can be opened far enough to allow changing the filters.
4.2 Anti-tilt protection / assembly mounting bracket
WARNING!
Danger due to AHU tipping over
Due to the high center of gravity of the AHU and / or accidental bumping against
the AHU, there is an increased risk of the AHU tipping over. Serious or life-threat-
ening injuries may result. Therefore, the AHU must be firmly anchored to a wall im-
mediately after installation using the supplied mounting bracket.
To secure the AHU against tipping over / falling, it must be mounted in the room as follows:
Содержание AirSanitizer
Страница 1: ...AirSanitizer INSTRUCTION MANUAL...
Страница 23: ...Instruction manual AirSanitizer 22 28 V12 20 0 9 Circuit diagram...
Страница 25: ...Instruction Manual AirSanitizer 24 28 V12 20 0 10 2 Declaration of conformity M Version...
Страница 27: ...Instruction Manual AirSanitizer 26 28 V12 20 0 11 2 Nameplate M Version Figure 17 Nameplate M Version...