7 - I
NSTALLING THE CONDITIONER
- Position and fit the aesthetic front panel to the wall (screws not supplied). Use screws suitable for the wall material
(11)
.
- We recommend that you put a bead of silicone between the panel and the wall to ensure effective sealing.
- Fold the flange’s 4 supports inwards
(12)
.
- Place the ducts onto the flanges ensuring that they are well secured on the supports
(13)
.
- Push the 4 supports towards the outside of the flange
(14)
.
- On the side of the conditioner to be placed against the wall unscrew the 2 grids from the housing using the supplied Hex wren
ch and retain the screws.)
(15)
.
- Using the screws retained in the last instruction, screw the 2 grids onto the aesthetic front panel
(16)
.
- Unscrew the 2 screws on the top of the conditioner using a Hex wrench (supplied), on the side to be placed against the wall. Retain the two screws
(17)
.
- Fix the conditioner housing to the metallic frame, taking care to press firmly onto the foam
(18)
.
- Screw down the conditioner housing using 2 screws at the top (those retained earlier) and 2 screws at the bottom (supplied in
the accessories packet)
(19)
.
•
Fitting onto a door:
You can fit the conditioner onto a door.
In this case, it is ESSENTIAL to check that the door is capable of supporting a weight of 46 kg and that it does not produce vibration.
The procedure for fitting is the same as for the wall.
•
Fitting close to the floor:
When the conditioner is fitted close to the floor it is ESSENTIAL that it is fixed to
the wall.
•
Conditioner with air extraction via piping:
Repeat the steps described at the beginning of paragraph III.
Conditioner housed outside the cellar:
- On the conditioner housing, unscrew the 2 grids (openings that will not be placed against the wall) using a Hex wrench (suppli
ed).
- Where the grids were located, position and screw, using a Hex wrench (supplied) the 2 flanges* onto the housing
(1)
and
(2)
.
- Fit together the reducer*
(3)
.
- Position the air extraction piping (standard piping, 160 mm in diameter, not supplied).
*
Consult your EuroCave distributor
(11)
(16)
)
3
(
)
2
(
)
1
(
(17)
(18)
(19)
(12)
(13)
(14)
(15)
12
