1) Remove the top hinge, fit the technical cross angle (support of the top
technical hinge) on the top panel of the cellar (3 screws per side).
2) Fit the top technical hinge and tighten slightly the screws.
3) Remove the bottom hinge, install the support of the bottom technical hinge.
4) Fit the bottom technical hinge on its support and tighten slightly the screws.
5) Fit the technical door on the technical hinges.
6) Adjust the door (see inset).
7) Tighten the screw of the hinges.
8) Remove the door lock plate.
Bottom Technical
Hinge Support
Top Technical
Hinge Support
Door adjustment:
level the cellar, align the
hinge chest side with the
hinge door side, adjust the
door in order to obtain a
gap of 14 mm between the
inner frame of the door
and the frame of the chest.
Check using a sheet of
paper if the seal is airtight
on all it tower of the cellar
when the door is closed.
TopTechnical
Hinge Support
TECHNICAL DOOR ASSEMBLY
