EuroCase CROSS CAM EUCS-1360, Руководство пользователя

Страница: 9 / 20

9
4.1. Memory card
First, insert a TF card; see the picture on the right.
When the professional mode is on for video recording a
Class 10 card is recommended for use.
NOTE: Please close the camera when plug-in or pull-out the card.
4.2 Turn-on & Turn-off
Turn-on: Press the on/off button and hold for about 2
seconds, the LCD display screen will be on (default mode:
video recording) and show a welcome screen. Power
indicator in red is normally on.
Power saving mode: When the camera is not under
operation for 1 minute (system default), it will enter into the
power saving mode. The LCD display screen will be off
automatically. The camera can be activated when any
button is pressed.
Turn-off: Press the button and hold for about 3 seconds
when the camera is not in operation, the camera will be off.
The camera will be automatically off when it is in power
saving mode for 3 minutes (system default). “GOODBYE” will
be on the LCD screen when it is off.
4.3 Charge the camera
Built-in rechargeable lithium battery is used for the camera:
The camera can be charged when it is connected to the
computer USB or a 5V charger with a USB cable. The power
indicator will be blue when it is charging. It shall take 4
hours because of the limited electric current of the
computer. The blue light will be off when charging is
completed.
4.4 Function mode switch
The camera has two modes, video recording and
photograph shooting. They can be converted by pressing
the button on/off /MODE or through APP.
Video recording: (see the following pictures) press the
shutter to start shooting and video recording. The buzzer
will send out one sound when it starts; the busy button (red)
will be twinkling during the video recording process. LCD
timer starts timing. Press the button again when video
recording is over.
Photograph shooting: Short press the take-photo button to
shoot photographs after it is switched to the photo-shooting
mode. The buzzer will send out 1 sound and the busy
button will be on once when 1 photo is shot. The counter
will countdown the photos accordingly.
Press the WIFI button for 2 seconds to activate the menu:
Enter the menu, short press the WIFI button to move the
cursor for selection; press the shutter button for confirmation;
extended press the WIFI button to cancel the setting or exit.
Power Save: the power saving mode has 4 settings, i.e.
OFF/1min/3min/5min. When the setting-time is up, the camera
will enter power saving mode and the screen will be off.
Date & Time:
system time setting
Language: language setting, English is by default.
Date Stamp: date stamp setting, OFF/Date/Date & time are
optional.
Factory Reset: factory reset, YES/NO are optional
System: check for system information (software version
number); check the information on the memory card (capacity
and available space)
Format: formatting the memory card, YES/NO are optional.
6- Connect to PC
7- REMOTE CONTROL
The video camera has the plug and play function. When
connected to a PC by the USB cable, it will automatically
switch to the mobile HDD mode. The removable disc icon will
appear on “My Compute r”. Your photos are stored in the folder
I:\jpg (I is removable disc for this device) in the removable disc.
And your videos are stored in the folder I:\video;
NOTE: No need to install drivers to run its mobile HDD function if your
operating system is windows 2000 or above.
The CrossCam 360 comes with a watch remote control.
For the first time put the battery in the back slot with the help
of a coin.
The remote control will be automatically linked with the
camera and will operate within a range of 10 meters.
Functions:
01
02
03
Record a video
Camera ON/OFF
Take a picture