28/02/2011
29/48
ALARM CLOCK FUNCTION
esys
includes a clock and a ring tone. This will allow you to program an alarm at a given time for
each day of the week.
This application looks like a line including the date, the time and a button showing you whether or
not the alarm is switched on.
The displayed time is refreshed every second. When the alarm is triggered, it will ring for 30 seconds
(
esys
will automatically switch on if it was switched off).
NOTE: If the battery of
esys
is completely discharged, the alarm-clock will reinitialize to January 1
st
2007, 12:00:00.
For example, a typical display is:
“12h05m28s Tuesday 05 july 2010 Alarm on (07H30H00 Monday Tuesday Saturday) T”
On the Braille line the current time, day and date should be visible as well as “alarm off” if no current
alarms are set.
Begin with making sure that the correct date is being displayed. To change the current date, refer to
“set date” section.
Below a description of menu items follows. In order to access to items, press on the left joystick
having the alarm-clock application open. The following will be displayed on the Braille line
“ack:set alarm set time set date T”
To change the alarm settings, click on “set alarm”.
The following menu is displayed :
alm:hour>00 minute>00 second>00 status>inactive monday>yes tuesday>yes ... sunday>yes ok
cancel T
Note: Values above may vary on the device you are using. Begin with typing in the alarm time.
Modify hour, minutes and seconds by typing in the edit boxes (for further information refer to the
“edit box” section)
The next step is to active/deactivate the alarm. Change the “status” scrolling menu using the right
hand side joystick up and down directions.
Concerning day selection, all days of the week are display in a row. By the scrolling menu principle
select whether or not you want your alarm clock ringing on Monday, Tuesday,...,etc.
Click on “ok” to confirm your settings or press cancel if no change is needed.
To change the time, select “set time”. The following menu is displayed:
“stm:hour>12 minute>05 second>28 ok cancel T”
SET ALARM MENU
SET TIME MENU
