Euroboor ECO.40S+, Руководство пользователя

Страница: 15 / 34

15
4. Using the machine
WARNING: Always observe the safety instructions and applicable regulations.
WARNING: To reduce the risk of serious personal injury, turn the machine off and disconnect
the machine from power source before making any adjustments or removing/installing
attachments or accessories.
4.1 Control panel
The control panel on your magnetic drilling machine is designed for maximum ease of use and safety.
1. Magnet switch
2. Motor switch
3. Magnet LED Indicator
4.2 Electromagnet
Make sure the magnetic drilling machine is placed on a smooth, clean, level and solid surface without
any objects or debris to guarantee maximum adhesion.
The workpiece must at least be 6 mm (1/4") thick for the magnet to stick and to drill safely. In case
the workpiece is between 3 mm (1/8") and 6 mm (1/4"), make sure to make a proper base to create
a good magnetic field as shown below.
[image 4-1]