Euroboor ECO.36+, Руководство пользователя

Страница: 14 / 39

14
Mounting the safety guard
The safety guard protects against chippings and accidental contact and must always be mounted
before operation.
1. Place the drill guard in front of the machine. Make sure the long slots on the side clip over
the small humps protruding from the gearbox body.
2. Fit the two thumbscrews in the designated holes, and tighten by hand.
Make sure the drill guard is fitted firmly, but don’t overtighten the screws.
[image 3-5]
WARNING:
Always use the safety guard.
Fitting the lubrication system
The lubrication system can only be used for horizontal drilling (the drill being used vertically).
1. The lubrication tank is equipped with an extra-long hose. This hose can be cut to the desired
length;
2. The tank is equipped with a magnet at the back. This makes it possible to place the tank
against any ferro product;