Euroboor AIR.55, Руководство оператора

Страница: 15 / 34

15
4. Using the machine
WARNING: Always observe the safety instructions and applicable regulations.
WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from
air supply source before making any adjustments or removing/installing attachments or
accessories.
4.1 Morse taper arbor
[image 4-1] [image 4-2]
1. Make sure the inside of the output shaft and the Morse Taper 3 (MT3) arbor are clean and
free of grease
2. Align the coolant ring rotation limiter with the recess in the gearbox (A)
3. Firmly slide the Morse Taper arbor into the output shaft by hand (B). Make sure it is properly
positioned. You should not be able to pull it out by hand.
4. To remove the Morse Taper arbor
- Switch of the air supply and motor
- Rotate the output shaft by hand until the slot on the shaft aligns with the slot on the
gearbox
- Gently tap the supplied drift key into the slots with a hammer and pull out the Morse
Taper arbor