Euroboor AGR.1400, Руководство пользователя

Страница: 2 / 6

Euroboor Angle Grinder
– AGR.1400
Overview
1. switch trigger
2. Drive shaft
3. Side handle
4. Gear box
5. Housing handle
6. Protective cover
7. Lock button
8. External flange spanner
9. External flange with thread
10. Internal flange
11.Lock off button
General Safety Instructions for Electric Tools
This device is exclusively for private use! It is not fit for commercial use!
WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury :
SAVE THESE INSTRUCTIONS
1)Work area
• Keep work area clean and well lit. Cluttered and dark areas invite accidents
• Do not operate machines in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Machines create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating a machine. Distractions can cause you to lose control.
2)Electrical safety
• Machine plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) machines.
Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose machines to rain or wet conditions. Water entering a machine will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the machine. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a machine outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
3)Personal safety
• Stay alert, Watch what you are doing and use common sense when operating a machine. Do not use a machine while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while operating machines may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust mark, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
•Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying machines with your finger on the switch or
plugging in machines that have the switch on invites accidents.
•Remove any adjusting key or wrench before turning the machine on. A wrench or a key left attached to a rotating part of the machine may
result in personal injury.
•Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of
these devices can reduce dust related hazards.
4)Machine use and care
• Do not force the machine. Use the correct machine for your application. The correct machine will do the job better and safer at the rate for
which it was designed.
•Do not use the machine if the switch does not turn it on and off. Any machine that can not be controlled with the switch is dangerous and must
be repaired.
•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing machines. Such preventive safety
measures reduce the risk of starting the machine accidentally.
• Store idle machines out of the reach children and do not allow persons unfamiliar with the machine or these instructions to operate the
machine. Machines are dangerous in the hands of untrained users.
• Maintain machines. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the
machines operation. If damaged, have the machine repaired before use. Many accidents are caused by poorly maintained machines.
•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the machine, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of machine, taking into account the working conditions and the work to be
performed. Use of the machine for operations different from intended could result in a hazardous situation.