background image

2

461308002 _006           12/2013

The appliance was designed and made in accordance with the European standards listed below:
=> EN 30-1-1, EN 30-2-1 and EN 437 plus subsequent amendments (gas)
=> EN 60 335-1 and EN 60 335-2-6 (electrical) plus relative amendments

The ap

pliance complies with the prescriptions of the European Directives as below:

=> 2006/95 EC concerning electrical safety (BT).
=> 

2004/108 EC concerning electromagnetic compatibility (EMC)

=> 2009/142/EC concerning gas safety.

Oven accessories that could come into contact with foodstuffs are made with materials that comply with 
the provisions of the 89/109 EC directive dated 21/12/88.

This product complies with EU Directive 2002/96/EC. 
The crossed-out dustbin symbol reported on the appliance indicates that the appliance must be disposed 
of separately from other domestic refuse at the end of its useful life. It must therefore be delivered to a 

waste recycling centre speciically for electric and electronic equipment or returned to the retailer at the 

moment of purchase of a new equivalent appliance. 

The user is responsible for delivering the appliance to the appropriate collection centre at the end of its 

useful life, Failure to do so may result in a ine, as provided for by laws governing waste disposal. 

Differential collection of waste products for eventual recycling, treatment and environmentally friendly 
disposal helps reduce possible negative effects on the environment and health, and also enables the 
materials making up the product to be recycled.
For more detailed information on the available refuse collection systems, refer to the local Municipal 
Solid Waste disposal centre or the shop where the product was purchased.

Producers and importers are responsible for fulilling their obligations as regards recycling, treatment 

and environmentally friendly disposal by directly or indirectly participating in the collection system.

Содержание ESD600EUSX

































Отзывы: