EURO EE900GSXS, Руководство пользователя и инструкция по установке

Страница: 30 / 40

30
INSTRUCTIONS FOR THE INSTALLER
Hot Plate Ignition Failure
‡ &KHFNDOLJQPHQWRIEXUQHUKROHVWRHOHFWURGH
‡ &KHFNDHUDWLRQVOHHYHIRUDGMXVWPHQWIRUJDVW\SH
location and ambient conditions.
‡ 1RVSDUNFKHFNLJQLWLRQER[IDLOXUHRUSRZHUVXSSO\
Before Leaving
‡ &KHFNDOOFRQQHFWLRQVIRUJDVOHDNVZLWKVRDSDQG
water. DO NOT XVH D QDNHG ÀDPH IRU GHWHFWLQJ
OHDNV,JQLWHDOOEXUQHUVWRHQVXUHFRUUHFWRSHUDWLRQ
of gas valves, burners and ignition.
‡ 7XUQ JDV WDSV WR ORZ ÀDPH SRVLWLRQ DQG REVHUYH
VWDELOLW\RIWKHÀDPH:KHQVDWLV¿HGZLWKWKHFRRNHU
please instruct the user on the correct method of
operation.
• In case the appliance fails to operate correctly
DIWHUDOOFKHFNVKDYHEHHQFDUULHGRXWUHIHUWRWKH
authorised service provider in your area.
29(1%851(5ÀJ
The burner is installed on the oven base and is covered
by the bottom plate which must always remain in that
position during oven operation,
To adjust the primary air, is performed when the
burner is ignited, by adjusting the sleeve (B) and
XQVFUHZLQJ VFUHZ $ /RFN VFUHZ $ LQ SODFH RQFH
the adjustments have been made.
CHANGING THE FLEXIBLE GAS HOSE
In order to guarantee that the gas hose is always in
excellent condition we strongly recommend changing
LWRQWKHGDWH\RXZLOO¿QGSULQWHGRQLW
21
GAS CONVERSIONS
REPLACING THE INJECTORS
Our burners can be adapted to different types of gas
by simply installing the injectors suitable for the gas
you want to use. To help the installer, the table
(see
TECHNICAL FEATURES paragraph ) gives the burner
nominal heat input, injector diameter and operating
pressure of the different gas types.
&RPSO\ZLWKWKHIROORZLQJLQVWUXFWLRQV
Injector replacement - Hob burners.
To change the injectors on the hob, remove the burner
FXS DQG KHDG DQG ZLWK D PP ‘ VRFNHW VSDQQHU
UHSODFHWKHP¿J
Injector replacement - Oven burner.
5HPRYHRYHQEDVH5HPRYHVFUHZ'¿JZKLFK
will release burner and give access to the injector (C).
Unscrew injector and replace it. Replace burner and
replace screw (D).
After having replaced the injectors, it will be
necessary to proceed with burner adjustment as
explained in the previous paragraphs.
20
22