EURO EDV600SS, Инструкция по эксплуатации, Страница: 13 / 21

10
It is dangero us to open the do or when was hing, because the hot water may s cald you.
When the wo rking cycle has fi nished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off
t he appliance using the ON/OFF button, shut off the wa ter supp ly and open the door of the dishwashe r.
Wait for a few minutes bef ore unlo ading th e dishwasher to avoid ha ndlin g the dishes and utensils while th ey
are still hot and more susceptible to break age. The y will also dry better.
Switch Off the Dishwasher
The running indicator light is off, only in this case the programme has ended.
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
If you open the door , the machine will pause. The pr ogram light will
stop blinking and the buzzer will sound every minute unless y ou close the door . After
you close the door ,the machine will keep on working after 10 seconds.
during a wash cycle
Premi se:
A cycle that is underway ca n on ly be modified if it has only been running fo r a short time. Otherwise, the
detergent may have alread y been re leased, a nd the appliance may have already drained the wash water.
If this is the case, the detergent disp enser mu st be refilled (see the section ent itled " Loading the
Detergent " ).
Press the start/reset button
, the machine will be in standb y state, then you can
change the progr am to the desi red cycle setting (see the section entitled " Star ting a wash cycle. . ." ).
The program lights show the state of the dishw asher:
a) One of the program lights on------------------------ --------------pause
b) One of the program lights blinking ----------------------------- ------ run
c) Some of the up thre e pro gram ligh ts quick flashi ng--- ---------error
more than 3 seconds
1
2
3
When you pr ess the Star t/Reset button to pause during washing, the program light will
stop blinking and the dishwash er will beeping eve ry minute unless you press the
Start/Reset button to sta rt.
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working,you can open the door
completely.
2
3
Open the door a little to stop the washing.
1 4
5
6
Press the start/reset button
Press the start/reset button, the dishwasher will run
after 10 seconds.