5
Fill the detergent dispenser with detergent.
The marking indicates the dosing levels , as
illustrated on right:
The place of ma in wash cycle detergent placed ,
“MIN”means approximately 20g of detergen.
The place of pre-wash cycle detergent placed ,
approximately 5g of detergent
Please observe the manufacturers dosing and storage
re commendations as stated on the detergent packaging.
Close the lid and press until it locks in place.
If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent
chamber. This detergent will take effect during the pre-w ash phase.
You find information about the amount of detergent for the single programmes on the
last page. Ple ase aware, that according to the level soiling and the specific hardness of
water differences are possible.
Please observe the manufacturer's recommendations on the detergent packaging.
Detergents
There are 3 sorts of detergents
1.With phosphate and with chlor ine
2.With phosphate and without chlorine
3.Without phosphate and without chlor ide
Normally new pulverised detergent is without phosphate. The water softener function of
phosphate is not given. In this case we recommend to fill salt in the salt container even w hen
the hardness of water is only 6 dH. If detergents without phosphate were use d in case of hard
water often white spots appear at dishes and glasses. In this case please add more detergent
to reach better results. Detergents without chlorine do only bleach a little. Strong and coloured
spots w ill not removed completely. In this case please choose a progr amme with higher
temperature.
NOTE:
1
2
Fill in detergent
Содержание ED12GS
Страница 1: ...ED8GS euro ...