EURO EAF600SS, Руководство пользователя, Страница: 6 / 15

Vertical discharge
Vertical is the most common.
If you select this venting direction,
you only need to open ducting
knockout by inserting a flat head
screwdriver under one end and prying
it up. Then snip or break the attachment
points by tin snips. You must make sure
that the ducting knockout B is not removed.
Horizontal discharged
Assuming that the range hood is located
against an outside wall, horizontal discharge
is preferred provided that there are no
obstructions such as wall joists, or where
opening are difficult to make.
If you select this venting direction, you only
need to open the ducting knockout B.
Same with removing the ducting knockout A,
you must make sure that the ducting knockout
A is not removed.
Sufficient air is needed for proper combustion and exhaustion of gases through the
flue (chimney) of fuel burning equipment to prevent back drafting.
,QIRUPDWLRQ
z
z
6