The wine cooler must be positioned that the plug is accessible. Release the
power cord and move your wine cooler to its finally location. The wine cooler
should be installed in a suitable place where the compressor will not be subject
to physical contact.
Note: For freestanding installation, it requires 30mm gap between both sides
for the wine cooler as well as the rear, which allows the proper air circulation to
cool the compressor and condenser. Even for built-in installation, it requires
10mm space on each side and at the top. The air vent at the front must never
to covered or blocked in any way.
*Levelling your wine cooler
Wine cooler must be levelled before loading your wines. Your wine cooler is
equipped with 4 adjustable feet to facilitate easy levelling. Euro Appliances
recommends that you tighten the back feet to the maximum and adjust the
front feet to create a level.
