background image

SAFETY & WARNING INSTRUCTIONS

continued

WARNING

Do not use pressure that exceeds the

operating pressure of any of the parts

(hoses, fittings, etc.) in the pressurized

system. Ensure that all equipment and

accessories are rated to withstand the

maximum working pressure of the unit.

WARNING

Explosion hazard.

• 

NEVER

 spray flammable liquids of use

pressure washer in areas containing 

combustible dust, liquids or vapors.

• 

NEVER

 operate this machine in a closed

building or in or near an explosive 

environment.

WARNING

Do not spray electrical apparatus or wiring.

• 

NEVER

 disconnect the high pressure

discharge hose from the machine while

the system is pressurized. To 

depressurize the machine, turn the power

and water supply off, then press the gun

trigger 2-3 times.

• 

NEVER

 permanently engage the trigger

mechanism on the gun.

• 

NEVER

 operate the machine without all

the components properly connected to

the unit (handle, gun/lance assembly,

nozzle, etc.).

WARNING

• Always hold gun and lance firmly when

starting and operating the machine.

• 

NEVER allow the unit to run with the

trigger released (OFF) for more than one

minute. Resulting heat buildup will 

damage pump.

• 

NEVER

 store the pressure washer outdoors

or where it could freeze. The pump will be

seriously damaged.

•  This unit must always be used in the 

horizontal position.

CAUTION

Keep hose away from sharp objects. Bursting

hose may cause injury. Examine hoses

regularly and replace if damaged. Do not

attempt to mend a damaged hose.

DANGER

EXTENSION CORDS

If using an extension cord, use only grounded,

three wire extension cords that are in good

condition. Use only extension cords that are

intended for outdoor use. These extension

cords are identified by a marking "Acceptable

for use with outdoor appliances; store indoors

while not in use." use only extension cords

having an electrical rating not less than the

product. Do not use damages extension

cords. Examine extension cord before using

and replace if damaged. Do not abuse

extension cord and do not pull on the cord to

disconnect. Keep cord away from heat and

sharp edges. Always disconnect from the

receptacle before disconnecting the product

from the extension cord.

Note: Do not use 16 or 18 AWG extension

cords on this product.

Equipment damage.

• 

ALWAYS

 turn water supply "ON" before

turning the pressure washer "ON". 

Running pump dry causes serious 

damage.

•  Do not operate the pressure washer with

the inlet water screen removed. Keep

screen clear of debris and sediment.

• 

NEVER

 operate pressure washer with

broken or missing parts. Check 

equipment regularly and repair or replace

worn or damaged parts immediately.

•  Use only the nozzle supplied with this

machine.

•  Never leave the lance unattended while

the machine is running.

•  Never attempt to alter factory settings.

Altering factory settings could damage the

unit and will void the warranty.

DANGER

Failure to follow these instructions can result

in serious injury, including death.

WARNING

To reduce the risk of electrocution, keep all

connections dry and off the ground. Do not

touch the plug with wet hands.

Allowable Length 

Extension Cord  

25' 50’ 

14 AWG 

YES 

NO 

12 AWG 

YES 

YES 

2

5

8

OPERATING INSTRUCTIONS

Storing Your Pressure Washer

When you have finished using your

pressure washer, follow these steps for

safe storage:

1. Turn the pressure washer to the 

"Off" position.

2. Turn off the water supply.

3. Before disconnecting the high 

pressure hose connection, point the

trigger gun in a safe direction away

from you and discharge the high

pressure water. Disconnect the high

pressure hose from the pressure

washer.

4. Disconnect garden hose from 

pressure washer.

5. Remove excess water from the 

pump by tipping the unit on both

sides to drain any remaining water

from the water intake and outlet 

fittings.

6. Drain detergent applicator bottle and

flush with clean water.

7. Wipe away any remaining water on

all parts and fittings.

8. Engage the trigger gun safety lock.

9. Store the unit and accessories in a

room above 32°F.

Winterizing & Long Term Storage

1. Disconnect all water connections.

2. Turn the pressure washer on for a

few seconds, until any remaining

water in the pump exits.

3. Turn the unit off immediately.

4. Store the pressure washer, parts

and accessories in an area with a

temperature above 32°F.

Motor Thermostat

Important

This pressure washer is

equipped with a motor thermostat. The

motor will stop if it is overheating. Wait

10-20 minutes before starting the unit

again. If it stops again, please call

customer service at 1-800-798-7398.

Ground Fault Circuit
Interrupter (GFCI)

This unit is equipped with a 

Ground

Fault Circuit Interrupter (

GFCI) built into

the plug. This device provides additional

protection from the risk of electrical

shock. When connecting the GFCI to the

electrical outlet, the indicator should

appear red. If the indicator is not red,

depress the RESET button on the GFCI

until the indicator appears red.

Cleaning Tips

Wood Decks: Rinse deck and

surrounding area with fresh water. If

using detergent, fill the detergent

applicator bottle and apply to the area

being cleaned. For optimal results,

reduce your work area to small sections

and clean each section one at a time.

Allow the detergent to rest on the surface

for a few minutes and then rinse at high

pressure. Do not let the detergent dry on

the deck. Always clean from left to right

and top to bottom for best results. Rinse

at high pressure using the lance keeping

the tip of the spray nozzle 8-12 inches

from the surface. 

Caution:

 For soft

woods, increase the distance from the

cleaning surface.
Cars, Boats, & Motorcycles: Wet down

area to be cleaned before applying

detergent with clean water. Fill the

detergent applicator bottle and apply to

the area being cleaned. To achieve best

results, clean one side at a time. Allow

the detergent to rest on the surface for a

few minutes but do not let it dry. Rinse at

high pressure using the high pressure

lance in a sweeping motion keeping the

tip of the spray nozzle at least 8-10

inches away from the surface. Maintain a

further distance when using a direct

spray. Wipe surface for a polished finish.

7

Отзывы: