FAMILIARISEZ-VOUS AVEC VOTRE RETRACTEUR
SHARK
9
Spécifications techniques
Tension :
120 V, 60 Hz
Intensité :
7.1 A
Avertissement : Les illustrations peuvent différer du produit lui-même.
6.
Poignée
7.
Boyau souple
8. Électrobrosse pneumatique
9.
Écran à débris
10. Filtre HEPA
11. Bride du Cadre
1.
Bouton de relâche
de la coupelle
2.
Bouton de mise en marche
3.
Coupelle à poussière (réservoir)
4.
Trappe de succion
5.
Bouton Rétracteur
9
10
11
6
TO ORDER REPLACEMENT FILTERS or FOR
TECHNICAL SUPPORT
for Models EP187N - EP187TN
Call:
1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
or
visit our website: www.sharkvac.com
ORDERING REPLACEMENT DUST CUP FILTERS
Replacement HEPA Filter SKU# XSH187
Please Note:
The HEPA Filter may be washed.
It should, however, be
replaced every three (3) to six (6) months, depending on amount of use, to ensure
peak performance of your vacuum.
After each Use - Always remove the Filter Debris Screen from the HEPA Dust
Cup Filter, then vigorously “
TapClean
” HEPA Filter until no more dust can be
removed. Filter should be rinsed and completely dried at least once a month or
when suction appears reduced.
To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse
under a tap until all observable dirt has been removed. Some discoloration of the
HEPA filter material may occur, this is normal and will not affect the filter's
performance. When finished, shake off excess water. Do
NOT
wash in dishwasher.
It is important that when you wash the HEPA dust cup filter, you allow it to dry
COMPLETELY
before using again. We recommend 24 hours to air dry.
DO NOT
DRY IN DRYER
.
