Euro-Pro SC620 Скачать руководство пользователя страница 2

FEATURES OF YOUR GARMENT STEAMER

ADDITIONAL IMPORTANT SAFEGUARDS  cont.

1. The steam diffuser/handgrip at the 

end of the steamer hose is located 
just behind the garment brush. By 
grasping the steam diffuser/handgrip 
you can aim the direction of the 
steam released from the nozzle.

Caution:

The steam hose becomes hot 

during use. Never hold, pull or move 
unit by the hose while in use.

2. The garment brush with its small 

openings is located at the end of the 
steamer hose. Always place the 
nozzle end of the hose on the 
garment hanger when not in use. 
Keep the nozzle pointed upwards 
and steam will rise from the 
openings. Try not to point the nozzle 
downwards, water may condense in 
the hose during idle periods and drip 
from the nozzle.

3. The garment rod has a convenient 

hook shaped end for resting the 
nozzle end of the hose. It can be 
extended and retracted by adjusting 
the telescopic rod in its sleeve.

4. The On/Off switch button can be foot 

activated to turn the power “ON” or 
“OFF”.

5. The ready light (green) comes on 

when the unit is turned “ON”.

6. The water tank is removable for easy 

filling and is see through for easy 
monitoring of the water level. The 
screw cap is fitted with a one way 
valve to ensure drip free replacement 
of the water tank when refilling.

7. The Garment Steamer base houses 

the reservoir, water tank, hose 
attachment and adjustable garment 
rod.

1.  To avoid circuit overload, 

do not

operate another appliance on the same socket (circuit) 

2.  If an extension cord is absolutely necessary, a 15 ampere 14 gage cord should be used.  

Cords rated for less amperage may overheat.  Care should be taken to arrange cord so 
that it cannot be pulled or tripped over.

3.  

Do not

leave unattended when the system is connected to a power supply/electrical outlet.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

WARNING

: To reduce the risk of electric shock, this 

appliance has a polarized plug (one 
blade is wider than the other).  This plug 
will fit in a polarized outlet only one 
way. If the plug does not fit fully in the 
outlet, reverse the plug.  If it still does 
not fit, contact a qualified electrician to 
install the proper outlet.  Do not modify 
the plug in any way.

CAUTION:

Hose can become hot during use. 
NEVER hold, pull or relocate unit by the 
hose while in use. When you need to 
move the steamer, hold by the garment 
rod. Hold the steamer head by the 
handgrip and never by the hose.

2

3

Содержание SC620







Отзывы: