background image

Read all the sections of this booklet and follow all the instructions carefully.

3

Whisk: 

The whisk is used to beat air into 
mixtures such as egg whites, yolks or 
cream. To insert whisk: There is only 
one whisk provided. Hold whisk at stem 
end and insert into one of the holes 
until it clicks into place. 

DO NOT PUSH 

WHISK IN FROM THE WIRE END AS 
WIRES MAY BE DAMAGED.

OPERATING INSTRUCTIONS

Before using your 

Power Mixer 

for the 

first time, wash the beaters, dough 
hooks, whisk and glass bowl in warm, 
sudsy water. Rinse and dry thoroughly. 

Warning: 

To avoid injury when inserting 

or removing beaters, dough hooks or 
whisk always set the speed selector on 

0" and unplug the appliance.

Warning

The unit is designed for 

intermittent use. The maximum operating 
time on settings 

1-3

” 

in the "Lo" range 

is 10 minutes non-stop with beaters, 
dough hooks, or whisk. The maximum 
operating time on settings 

1-3

” 

in the 

"Hi" range is 30 seconds non-stop with 
beaters, dough hooks, or whisk. 

Beaters, Dough Hooks, Whisk: 

Select the attachment according to the 
type of mixing required. Make sure that 
the mixer is unplugged from power 
source and speed selector is set on 

0" 

before inserting or removing beaters, 
dough hooks or whisk

.

Beaters:

Use for liquid mixes such as creams, 
egg-whites, confectionery doughs, etc. 
insert stem end of beaters (one at a time) 
into the openings in the mixer. Insert the 
beater with the gear in the larger of the 
two holes. The gear on the beater must 
sit below the surface of the mixer 
housing. To ease the inserting of the 
beaters, a slight twisting motion will aid in 
engaging the beater drive tabs. Install the 
second beater in the same manner as 
above. 

Dough hooks:

Use for light doughs. Insert dough hooks 
in the same way as beaters above.  See 
installing instructions for beaters above. 
Always use both dough hooks. Never try 
to work with one beater and one dough 
hook at the same time. 

Do not 

use 

dough hooks at low speeds as this may 
cause motor to overheat. When using 
dough hooks for heavy or thick dough, 
use only high speed (3) from the 
beginning to prevent the motor from 
overheating (blocking).

Warning: 

Never operate the appliance 

without all the parts in place.  Make sure 
that 

all 

parts are properly assembled 

before turning on the unit. 

Bottom View

Large Opening

Gear

4

OPERATING INSTRUCTIONS

To Operate the Hand Mixer

• 

Gently pull the power cord from 
the main unit. 

Caution: 

Do not pull with force on 

the power cord or you will damage 
the rewinding feature and void the 
warranty. When rewinding, always 
hold the plug to avoid cord whipping.

• 

Before plugging in the unit, fit the 
desired attachment required for 
the mixing operation to be carried 
out.

• 

Insert the beaters or the dough 
hooks one at a time by pressing 
them gently upwards until they are 
fully fitted and you hear a click. 
Make sure that the attachment 
with the gear is inserted into the 
larger hole opening. (See 
illustration below.)

Bottom View

Large Opening

Gear

To Operate the Hand Mixer 

(cont.)

• 

When you have inserted the 
attachment that you desire, plug in 
the mixer.

• 

Pick up the mixer and use your thumb 
to set the speed selector and the 
Hi/Lo range selector to the setting that 
you desire.

Warning

The unit is designed for 

intermittent use. The maximum operating 
time on settings 

1-3

” 

in the "Lo" range 

is 10 minutes non-stop with beaters, 
dough hooks, or whisk. The maximum 
operating time on settings 

1-3

” 

in the 

"Hi" range is 30 seconds non-stop with 
beaters, dough hooks, or whisk. 

• 

We suggest that you begin at the 
highest speed to prevent the 
motor from blocking.

• 

Ensure that the beaters are 
completely free to move in your 
mixture. 

• 

Return to "0" setting when you 
have finished using the mixer or 
you wish to stop.

• 

To remove the attachments from 
the mixer, press the beater 
release button.  This button only 
works when the mixer is on the "0" 
speed setting.

• 

To rewind the power cord, push 
the cord rewind button.

Caution: 

When rewinding, always 

hold the plug to avoid cord whipping.

SPEED SETTINGS

HI/LO RANGE SETTINGS

SPEED SELECTOR

"LO"

"HI"

"0"

Off

Off

"1"

Lowest

High-Middle

"2"

Low

High

"3"

Low-Middle

Highest

Отзывы: