4
OPERATING INSTRUCTIONS
Operating the Food Processor
Setting up:
1.
CAUTION
: Make sure that the unit is
unplugged from the power source and
the the Speed control dial is in the
"Off" position before inserting or
removing any attachments and before
cleaning.
2. Fit the safety cover into the food
processor body and turn
counterclockwise firmly until it “clicks”
into place (the arrows will now be
lined up).
IMPORTANT THE FOOD
PROCESSOR WILL NOT OPERATE
WITHOUT THE SAFETY COVER IN
PLACE.
3. Place the food processor bowl onto
the processor body.
There is no need
to turn the bowl.
(Fig. 2)
4. When fitted correctly,
the handle will be
to the right of the
assembly, and the
ridge on the base
of the bowl will fit into the slot at the
back of the processor body.
(Fig. 3 & Fig. 4)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
5. Fit the spindle onto the motor shaft
and the appropriate attachments
onto the spindle. (Fig. 5)
WARNING
TO REDUCE THE RISK OF
INJURY, NEVER PLACE THE
CUTTING BLADE ON THE BASE
WITHOUT FIRST PUTTING THE
BOWL PROPERLY IN PLACE.
WARNING: Always remove the
blender and fit the safety cover into
the processor body when using the
processor.
For safety, always
use the food
pusher when
putting food into
the feeder tube.
Never feed by
hand. (Fig. 9)
Fig. 5
6. Holding the
processor lid
by the feed tube,
fit the lid by
rotating
counterclockwise.
(Fig. 6)
Fig. 6
7. Ensure that the lid
tab has “clicked”
into place and the
arrows are lined
up. (Fig. 8)
Fig. 7
8. Plug the processor
and switch on.
If the processor
does not come on,
check that the
machine cover and
processor lid are
both correctly fitted.
(Fig. 8)
Fig8
Fig9
OPERATING INSTRUCTIONS
Citrus Juice Filter
CAUTION: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the “OFF”
position before inserting or removing
attachments.
WARNING: Always Operate The Juicer At
Lowest Speed Only. Do Not Operate The
Citrus Juicer At Higher Speeds.
1. Fit the processor bowl
as detailed previously
(page 4).
2. Fit the citrus juice filter
into the processor
bowl. (Fig. 26)
Fig. 26
9
3.
Rotate counter
clockwise. Ensure
that the citrus juice
filter tab has clicked
into place. (Fig. 27)
4.
Insert the juice
reamer into the center
of the citrus juice filter
with its shaft inside
the central column of
the bowl. (Fig. 28)
5.
Plug in the appliance.
6.
Place fruit on juice reamer and hold with
a cupped hand.
7.
Operate at minimum speed.
WARNING: Always operate the
juicer at minimum speed only.
Do not operate the citrus juicer at
higher speeds.
Fig. 27
Fig. 28
Operating the Blender (Cont.)
2. Remove the safety
cover. This can only
be done once the
processor lid has
been removed.
(Fig. 30)
3. Place the blender
into its location on
the processor body
with the handle to the
left. Turn counter
clockwise until the
blender clicks into
place and the arrows
are aligned.
(Fig. 31)
Warning: Use extreme caution -
blades are sharp. Handle carefully.
4. Place food in blender.
5. Place the blender lid
and the measuring
cap on the blender.
(Fig. 32)
6. Replace the
processor bowl
and processor lid.
Ensure that the lid
tab has clicked into
place. The blender
will not operate if
the processor lid is
not clicked in place.
Make sure that
NO ATTACHMENTS
are inside the food processor bowl
when you are using the blender.
(Fig. 33)
7. Plug in the processor.
8. Always operate the blender with the
lid in place.
9. Recommended speed levels for
blending are between 5 - MAX.
When blending soft vegetables or
fruits start with level "5" and then go
to a higher level. For hard
vegetables or fruit always use "
MAX" speed level.
IMPORTANT:
Do
NOT
load the
blender with more than 10 oz.
(300 gr.) of hard vegetables at one
time. Do
NOT
operate continuously
for more than 20 seconds at one
time.
Operating the Blender
CAUTION: Make sure that the unit is
unplugged from the power source
and the speed control dial is in the
“OFF” position before inserting or
removing attachments.
1. Remove the processor
bowl and lid. (Fig. 29)
Fig. 29
Fig. 30
Fig. 31
Fig. 32
Fig. 33
Speed Control Dial
The food processor and blender
speed control dial has speeds settings
as follows: (Fig. 1)
Off/1-9 + Max
Pulse/Turbo
The speed can be
adjusted while the
food processor is
in use.
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse"
when the unit is in the "Off" position.
Use "Turbo" when the unit is in the
"On" position and you need a burst of
power. Please note that the "Pulse"
and "Turbo" is only intended to be
used for short "bursts" of processing.
Содержание EP96W
Страница 2: ......
