STEAM GENERATOR
IMPORTANT SUPPLEMENTARY USER INFORMATION
Read all instructions before using the
Steam Generator Iron
and follow all instructions and
safeguards carefully.
IMPORTANT NOTES ON THE USE OF A STEAM GENERATOR:
DO NOT OPEN THE SAFETY/FILLER CAP (1) BEFORE ALL THE REMAINING STEAM IS
RELEASED (EMPTIED) FROM THE WATER TANK/STEAM GENERATOR (5) AND THE
GENERATOR HAS COOLED. TO RELEASE THE STEAM TURN THE STEAM ON/OFF
ROCKER SWITCH (3) TO THE “OFF” POSITION. PUSH THESTEAM BUTTON (C) UNTIL NO
MORE STEAM COMES OUT OF THE IRON, THEN OPEN SLOWLY THE SAFETY/FILLER
CAP (1).
1. A WORD ON WATER
For best results
we
recommend using 100% demineralized/distilled water.
The use of demineralized/distilled water will prolong the life of your generator and reduce the
frequency of required generator cleaning, as well as the possibility of staining due to
accumulated impurities.
DO NOT USE WATER PROCESSED THROUGH A HOME WATER SOFTENING SYSTEM
OR BOTTLED MINERAL WATER.
If you choose to use regular tap water, make sure that the chloride (CL) level of your local water
supply does not exceed 8mg/liter. In many areas, the chloride level exceeds 8mg/liter. Use of
tap water with high chloride levels will adversely affect the life expectancy of your steam
generator. Tap water can be mixed with demineralized/distilled water to lower the chloride level.
For best results make sure to use the right proportions to bring the chloride level to 8mg/liter or
less.
2. DO NOT OVERFILL THE STEAM GENERATOR
When empty, the water tank/steam generator (5) can be filled with 1 liter/33.8 US oz. of
demineralized/distilled water. Do
NOT
overfill. Overfilling the tank can cause water drops
coming out of the steam holes. See instructions on page 6.
3. DO NOT CLOSE THE SAFETY/FILLING CAP (1) TOO TIGHTLY
To close, turn the Safety/Filler Cap (1) clockwise until the point where you feel friction - do not
close too tightly. The Safety/Filler Cap (1) includes a gasket which can be flattened and
damaged if the cap is closed too tightly. If the gasket is damaged, steam may escape while
the generator is used, even when the Safety/Filler Cap (1) is closed. If your Safety/Filler Cap
(1) is damaged and steam is leaking, you may call Customer Service at
514-842-8691 to purchase a replacement Safety/Filler Cap (1).
4. FOR BEST RESULTS DO NOT LEAVE HOT IRON RESTING IDLE ON IRON REST (6)
FOR LONG PERIODS OF TIME
The life-span of your EP8015 will be reduced if the iron is left idle at high temperatures for
extended periods. If iron is not in use, reduce its temperature to the lowest temperature setting
on the Temperature Dial (B).
5. WARRANTED FOR REGULAR HOUEHOLD USE
While the EP8015 is a professional type ironing system, it is intended for and warranted only
for normal household use. Iron and/or steam generator should not be used for more than 15
hours per week in approximately 3 hour intervals.
4
