background image

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Warning:

Always unplug from 

electrical outlet before opening the dust 

cup (container).

Note

: Dust cup filter must be used 

when operating the hand vacuum.

3. To use the flexible hose, push 

the end of the hose into the 
suction hole, then attach the 
desired accessory to the other 
end of the flexible hose, as 
shown below.

Cleaning & Changing the 
Dust Cup Filter

Warning:

Always unplug the unit from 

electrical outlet before opening the Dust 

Cup (container).

Important:

Do 

NOT

use the hand 

vacuum without the dust cup filter in 

place.

Warning

:

After each Use - Always 

remove and empty the Dust Cup Filter.

Fig. 3

3. Empty the dust from the dust cup 

(container). (Fig. 3)

4. Rinse the dust cup filter in cold water 

and then wait 24 hours until it dries 

completely before replacing back 

into the dust cup (container). 

(Fig. 4 & 5)

5.  When the dust cup filter is completely 

dry, replace the dust cup filter carefully 
back into the dust cup (container).

6.  Attach the dust cup (container) to the 

Hand Vacuum.

Fig. 4

Fig. 5

Assembling the Hand Vacuum

1. To open the dust cup (container), push 

the dust cup release button and pull 

out the dust cup. Verify that the dust 

cup filter is inside, then attach the dust 

cup (container) to the hand vacuum.

1. To open the Dust Cup (container), 

push the dust cup release button 

and detach the Dust Cup 

(container). (Fig. 1)

2. Remove the dust cup filter. (Fig. 2)

Fig. 1

How To Operate Your 
Hand Vacuum

1. Hold the hand vacuum firmly in 

your hand by the Handle.

2. Push the On/Off Power Button to 

“On” position.

3. Start vacuuming.

2. To attach the crevice tool or 

upholstery brush to the Hand 

Vacuum, push desired accessory 

into the suction hole, as shown 

below.

CAUTION:

The Hand Vacuum is a

very powerful unit.  Make sure that you 

hold it firmly, otherwise it can slip out of 

your hand and cause injury.

Fig.2

CAUTION

:

The suction hole must be 

open, free of any obstructions at all 

times.  Otherwise, the motor will overheat 

and could become damaged.

Please Note:

The Dust Cup Filter is 

washable.  It should, however, be 

replaced every three (3) months to 

ensure peak performance of your 

vacuum.

Important: Make sure that Dust Cup 

Filter is completely dry before re-

installing back in the hand vacuum.

3

4

Содержание EP031KCW

Страница 1: ...Hand Vacuum OWNER S MANUAL Model EP031KCW 120V 60Hz 450 Watts 3 75 Amps EURO PRO Operating LLC 94 Main Mill Street Door 16 Plattsburgh NY 12901 Tel 1 800 798 7398 ...

Страница 2: ..._ Date purchased Name of store ______________________________________________________________________ Owner s name ______________________________________________________________________ Address City State Zip Code EP031KCW When using your Hand Vacuum basic safety precautions should always be observed including the following To reduce the risk of fire electric shock or injury Do not leave the hand ...

Страница 3: ...up 2 Review Dust Cup Filter instructions see page 4 3 Replace dust cup filter see page 4 HAND VACUUM HOSE OR BRUSHES WILL NOT PICK UP 1 Hose clogged 2 Dust cup is full 1 Remove hose and or bushes Remove obstruction from hose 2 Empty and clean dust cup REPLACEMENT FILTERS Replacement dust cup filter SKU AKC031 for Model EP031KCW Call 1 800 798 7398 Monday to Friday 8 30 A M 5 00 P M Eastern Standar...

Страница 4: ...and Vacuum Fig 4 Fig 5 Assembling the Hand Vacuum 1 To open the dust cup container push the dust cup release button and pull out the dust cup Verify that the dust cup filter is inside then attach the dust cup container to the hand vacuum 1 To open the Dust Cup container push the dust cup release button and detach the Dust Cup container Fig 1 2 Remove the dust cup filter Fig 2 Fig 1 How To Operate ...

Отзывы: