Operating Instructions
•
The flashing red light in the digital
display indicates ready to operate.
Use your thumb to press the soft
touch control for speed increase,
and increase to desired speed
setting. There are nine (9) different
speed settings. The speed setting
will be indicated on the digital
display. (Fig. 3)
•
We suggest when starting the
mixing procedure of recipes that call
for multiple and thicker ingredients,
you begin at the highest speed and
then decrease the speed as needed
to prevent the motor from blocking.
This can be done by pushing the
soft touch control “
BOOST
”. (Fig. 4)
“
BOOST
” automatically increases
the speed to “
9
”, the highest speed
setting. When pushing “
BOOST
”,
the digital display will show a letter
“
b
” and
NOT
a number “
9
”.
•
Ensure that the beaters, dough
hooks, or whisk, are completely free
to move in your mixture.
•
When a burst of power is needed
while mixing, press the soft touch
control "
BOOST
" to set to the
highest speed. When the burst of
power is no longer needed, press
the "
BOOST
" button again to return
to the previous speed.
DO NOT
operate at the boost setting for
more than 30 seconds.
(Fig. 4)
•
When you have finished or wish to
stop the mixer, press the soft touch
control “
OFF
”. (Fig. 4)
Digital Display
(Red LED)
Speed
Increase
Fig. 3
•
To remove the accessories, perform
the following steps:
1. Turn off mixer and unplug from
power source.
2. Using your thumb and index
finger, press each of the
accessory eject buttons
simultaneously. (Fig. 5) This
only works when the hand mixer
is turned off.
DO NOT attempt
to eject beaters/whisk/dough
hooks while unit is on.
BOOST
Fig. 4
OFF
•
To rewind the power cord, push the
cord rewind button.
Caution:
When rewinding, always
hold the plug to avoid cord
whipping.
WARNING: ALWAYS avoid contact with moving parts while
unit is in operation. Keep hands, hair, clothing, and
other utensils away from beater/dough hooks/whisk
during operation. Failure to do so could result in
serious injury.
5
Fig. 5
Accessory
Eject
Buttons
Maintenance & Cleaning Instructions
•
Ensure that the hand mixer is turned
off and unplugged before removing
and cleaning the accessories.
•
Wash the beaters, dough hooks, and
whisk in warm soapy water. The
beaters, dough hooks, and whisk are
also dishwasher safe.
•
Wipe the outside area of the hand
mixer with a damp cloth and polish
with a soft dry cloth.
NEVER
IMMERSE THE HAND MIXER.
PLUG OR POWER CORD INTO
WATER OR ANY OTHER LIQUID.
•
Wipe away excess food particles
from the power cord using a dry
cloth.
•
To make cleaning easier, remove
beaters and dough hooks and wash
right away after use. Dry with soft,
clean cloth.
WARNING:
To avoid injury when inserting or removing beaters or
dough hooks, always push the soft touch control “OFF”
and then unplug the unit.
CAUTION:
When rewinding the cord, always hold the plug to avoid
cord whiplash.
•
DO NOT USE SCOURING PADS,
HARSH DETERGENTS OR
ABRASIVE CLEANERS TO CLEAN
THE BEATERS, DOUGH HOOKS,
WHISK, OR THE MAIN UNIT TO
PREVENT DAMAGE TO THE
FINISH.
•
Once the hand mixer has been wiped
clean and dried, and is ready for
storing, push the cord rewind button
while holding the plug for the cord to
rewind.
Caution:
DO NOT pull with
excessive force on the power cord
or you will damage the rewinding
feature and void the warranty. When
rewinding, always hold the plug to
avoid cord whiplash. DO NOT pull
power cord out past the red marking
on the cord.
WARNING:
ALWAYS avoid contact with moving parts while
unit is in operation. Keep hands, hair, clothing,
and other utensils away from beater/dough
hooks/whisk during operation. Failure to do so
could result in serious injury.
6
WARNING:
DO NOT IMMERSE UNIT IN WATER
OR ANY OTHER LIQUID.
