Change the needle position
Changing the stitch length
These setting apply only to "straight" stitch patterns 1~4.
The machine
The pre-set position is "3.5", center position. When you
press
, the needle position will move to the left.
When you press
, the needle position will move to
the right. On the LCD screen, the point illustration and
the number indicate the needle position.
To shorten the stitch length, press the
button. For
a longer stitch length, press the
button.
If you are sewing on very fine (thin) fabric and you
want to use a long stitch length. The stitch length will
be set automatically to a maximum length of "4.0" even
if you select "4.5".
will sew 3 locking stitches automatically
when you are starting any of the pattern1~4.
STRAIGHT STITCHES AND NEEDLE POSITION
ZIGZAG STITCHES
T
T
Adjusting the stitch width
The maximum zigzag stitch width for zigzag stitching is
"7"; however, the width can be reduced on any patterns.
The width increases as you press the zigzag
button
from "0" - "7.0".
Attention:
For twin needle sewing, never set the width wider
than "3.5".
Adjusting the stitch length
The density of zigzag stitches increase as the setting
of stitch length dial approaches "0".
Neat zigzag stitches are usually achieved at "1.0" -
"2.5".
Closed up zigzag stitches (close together) are referred
to as a satin stitch.
24
A
