86
GB
2. Release the safety lock-off (2).
Note:
No need to press or hold the safety lock-off once the machine
started.
Fig.12
Switch off:
Release the ON/OFF Trigger lever (1). Then the machine will be stopped.
Repeat this process several times so that you are sure the machine functions properly.
HOW OFTEN TO SCARIFY YOUR LAWN?
This is based on how quickly your grass takes for re-growth and the hardness of the
soil.
WARNING!
Before you perform any repair or maintenance work on the
machine
，
ensure that the cutting unit is not rotating and that the power
supply is disconnected.
CHANGING THE ROLLERS
Before changing the aerator roller. Firstly ensure that the appliance is switched off,
disconnected from the mains power supply and that all moving parts have come to a
complete stop.
a)
Turn the machine over, remove the hex bolts using the Allen key (Fig.13).
Fig.13
Fig.14
b)
Open the bearing cover (A), lift the roller then pull out the roller to the left to
remove it. (Fig.14)
c)
Replace the roller, slide the roller onto the drive shaft, make sure the sleeve (B)
was fit onto the drive shaft (C). (Fig.15)
d)
Push the roller inside and install the bearing at the other end on the bearing
holder (Fig.15).
