31
original parts. Do not use a defective charger and do not open
it up yourself. This ensures that the safety of the device is
maintained.
●
Connect the charger only to a socket with an earth. Ensure
that the mains voltage matches the specifications on the
charger rating plate. Risk of electric shock.
●
Disconnect the charger from the mains before closing or
opening connection to the battery/product.
●
Keep the charger clean and away from wet and rain. Do not
use the charger outdoors.
●
Operate the charger only with the appropriate original
battery. Charging other batteries may result in injuries and
risk of fire.
●
Avoid mechanical damage to the charger. This may result in
internal short circuit.
●
Do not operate the charger on a combustible surface. Risk of
fire due to heating during charging.
●
The battery of the product is not fully charged at the time of
delivery. It therefore needs to be fully recharged before use it
for the first time.
●
When the battery is fully charged, unplug the charger from
the mains and from the product.
●
Do not charge the battery continuously since this may
damage the battery cells.
●
Protect the battery against heat, intense sunlight, fire, water
and moisture. Danger of explosion.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use low-
vibration and low noise operating modes as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
●
Only use the product as intended by its design and these instructions.
●
Ensure that the product is in good condition and well maintained.