6
Supertooth II
OPERATIONS
Make a Call (Normal dial):
Dial the number using your phone. Normally,
audio will be on the kit.
Note: With some phones like Siemens S55; Panasonic X70, audio is
always on the phone during an outgoing call. You will need to short
press
Accept / End Button[6]
to transfer the audio to your kit.
Make a Call (Voice dial):
1. First, you have to access the voice dialing function of your phone,
turn it on and record for a
voice tag
. (Kindly refer to the procedure
in your phone’s manual.)
Note: Voice dialing entries must be
stored in the phone’s memory, not on the SIM card!
When done, execute voice dialing in your kit by proceeding with the
instructions.
2.
Execute Voice dial:
Short press
Accept/ End Button[6]
.
3. A beep/short tone will then be heard on the
SuperTooth II
prompting
the user to say a voice tag of a contact to call.
4. Say the voice tag. The voice will be played back to you (audio on
kit) then the phone will dial the number automatically.
End a Call
(only 1 procedure for Headset Profile):
Short press the
Accept/ End Button[6]
.
Answer a Call:
When the phone receives a call, ring tone will be on the
SuperTooth II
alone, or both on the
SuperTooth II
and on the phone
(depending on your phone model). Just short press
Accept/ End
Button[6]
to answer the call.
Set the Volume:
Set the volume using the
Volume Control[10]
.
1. Turn it clockwise to increase the volume.
2. Turn it counterclockwise to decrease.
Note: If the volume set is too high, it can cause feedback (whistling
sound), echo, or background noise during calls on some cell phones.
I. HEADSET PROFILE
