Euro Appliances EO60SOSX, Инструкция по использованию и уходу, Страница: 4 / 13

3
INDICATOR LIGHTS
The indicator lights situated above the control panel go on and off when the heating elements are inserted or removed. During the
thermostatic functioning of the oven, the neon light remains on until the pre-chosen temperature is reached and when it goes out, this
is a sign that the temperature has been reached. When the oven cools, the thermostat determines the re-insertion of the heating
elements with consequent re-lighting of the indicator lights. In models the internal oven light, which is always on when any function is
in operation, is considered as an operation, and is considered as an operating warning light.
INSTALLING THE APPLIANCE
Important:
Unplug your oven before performing installation or maintenance!
I nstallation should be carried out according to the instructions by a
professionally qualified person.
The manufacturer declines all responsibility for any damage to persons,
animals or things due to a wrong installation.
FITTING THE APPLIANCE
Fit the appliance into its surround (beneath a work-top or above another appliance) by inserting screws into the 2 holes that can be
seen in the frame of the oven when the door is open.
For the most efficient air circulation, the oven should be fitted according to the dimensions shown in fig. 1-2 of page 2.
The rear panel of the cabinet must be removed so that air can circulate freely. The panel to which the oven is fitted should have a gap
of at least 70 mm at the rear.
NOTE: where ovens are to be matched with hobs, it is essential to follow the instructions contained in the
booklet supplied with the other appliance.
Fitting the Grill Rack
- Ensure shelf orientation is correct (refer picture on right)
- Slide into oven at angle until raised back of shelf is past the
stop on side runners.
- Lower front of shelf and push in until stop is reached.
- To remove oven shelves, withdraw to the stop and raise
the front of shelf to clear the stop.
For a built-in oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining furniture is made of veneered wood, the
adhesives should be able to withstand a temperature of 120
℃
. Plastic materials or adhesive which cannot withstand this temperature
IMPORTANT
⚫
During use the appliance becomes hot, Care should be taken to avoid touching heating elements inside the
oven.
⚫
Accessible parts may become hot during use. Yong children should be kept away.
⚫
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of the glass.